35. Glue W7 to the tip ribs. Glue W8 to W7.
(Photo 37)
36. Once the glue is dry, remove the tape and the
sandwich wrap from the wings. Use a razor
plane and sandpaper, shape the top of the
wing tip to match the leading edge profile.
(Photo 38)
NOTE: To obtain the correct profile, shape
from the leading edge to the trailing edge. If
you shape the wing tip from the trailing edge to
the leading edge the trailing edge ‘curl’ will be
the wrong shape.
37. Use a rotary tool to rough shape the
underside of the wing tip working from the
leading edge to the trailing edge. (Photo 39)
Photo 37
Photo 38
Photo 39
14
Savage Light Industries
F-106 Delta Dart
