１２３−４５６
１２３−４５６
Replacing the cutter
As the cutter is used, the sharpness will be lost and the cutting surface will be fluffy.
When it becomes like this, the cutter unit must be replaced.
In this case, contact a sales outlet, dealer, or service center.
Perforation
(Fig. 1)
(Fig. 2)
25 mm
4 mm
Folding perforation
The following items are the capacity of the cutter concerning the paper to use. Check before use.
①
The range of thickness of paper (including mounting) is 0.08 mm to 0.268 mm.
②
The valid range of cutting pitch is 20 mm to 400 mm.
③
+4 mm to +25 mm of folding perforations of fanfold paper is cut prohibited areas (Fig. 2).
Cut prohibited area
1. Thicknesses that can be cut are 0.08 mm to 0.268 mm.
For details, contact a sales outlet, dealer, or service center.
2. The cutting precision is
±
1.5 mm.
3. With the cutter unit, cutting pitch of 20 mm to 400 mm is valid.
However, cutting sizes may be regulated due to use conditions.
4.
±
1 mm of perforations is cut prohibited area.
★
Notes:
26
サトー取説_E 04.8.17 6:22 PM ページ 26
Summary of Contents for iGT400 Series
Page 1: ......
