manualshive.com logo in svg

SATO iGT400 Series, Instruction Manual

Share
Download
SATO iGT400 Series Instruction Manual Download Page 59

The printer settings in the User Mode setting operations are now complete.

Press either the                       or                   key to exit the User Mode setting.

●

Move the cursor with the      /      keys, and set either  

                                  or             .

 

●

Press the               button, and the setting is saved, and the 

next setting screen will appear.

 

●

The initial value is             .

FUNCTION

CANCEL

Proportional pitch setting process (whether to print in the 

breadth of each character or to print with a fixed character 

breadth) can be done.

Check that the “Proportional pitch setting” screen is shown as 

the following on the display.

The subject fonts are from x21 to 24.

The Kanji font style can be set to either “GOTHIC” or “MINCHO.”

Check that the “Kanji font style setting” screen is shown as the 

following on the display.

MINCHO

  

GOTHIC

KANJI

 

FONT

7

 

Kanji font style setting

The content of the display changes over to the “Proportional pitch setting” screen.

●

                 or                 shown represent the Kanji font style.

 

●

Move the cursor with the      /      buttons, and set the Kanji 

font style.

 

●

Press the               button, and the setting is registered, and 

the next setting screen will appear.

●

The initial value is Gothic.

ENTER

8

 

Proportional pitch setting

ENTER

The content of the display returns to the “User Mode.”

PROPORTIONAL

CHARACTER

 

PITCH

FIXED

MINCHO

GOTHIC

PROPORTIONAL

FIXED

FIXED

54

サトー取説_E  04.8.17 6:22 PM  ページ 54

Summary of Contents for iGT400 Series







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands