Advanced mode operation
The print density range will be set. The initial items “A to F” show
the corresponding print density range setting only.
Basically, adjustment is not necessary.
1
Print density setting screen
●
Move the cursor with the / buttons, and determine with
the button.
●
With the button, the set value will be saved and you
will proceed to the next screen.
●
The initial value is A.
ENTER
ENTER
DARKNESS
RANGE
A
B
C
D
E
F
The function to recognize if optional units are attached, and to
automatically change over the operation mode will be set.
2
Operation mode automatic setting screen
●
Move the cursor with the / buttons, and determine with
the button.
●
means the function is enabled.
●
means the function is disabled.
●
When each optional unit is detected, the operation mode will
be changed over as below.
• With the cutter unit, cutter operation • With the peel unit, peel operation
●
The initial value is ENABLE.
ENTER
YES
NO
PRINTER
TYPE
AUTO
SETTING
YES
NO
If other operation modes are selected when optional units are attached, choose “NO” in this setting.
ENTER
Press the , , , and buttons from the online mode screen to change over to the “Advanced
mode” screen.
When you press the button, the display will look like the
following.
●
When you press the button, the screen will return
to the previous screen without saving the set value.
●
When you press the button, the screen will
return to “Advanced mode” screen without saving the set
FUNCTION
CANCEL
ADVANCED
MODE
59
サトー取説_E 04.8.17 6:22 PM ページ 59
Summary of Contents for iGT400 Series
Page 1: ......
