Caution
●
Note that the “Print position correction” screen is different depending on the head density.
●
GT408: V
±
000 to 1424 dots, H
±
000 to 832 dots
●
GT412: V
±
000 to 2136 dots, H
±
000 to 1248 dots
●
GT424: V
±
000 to 4272 dots, H
±
000 to 2496 dots
Check if the “Print position correction setting” screen is shown as
the following on the display.
Print position correction
The print position correction is an operation to set the position to print on the paper.
The position to be the reference of printing (print reference position) is initially saved in this printer.
The setting is to decide how far off from the print reference position the printing is performed (base
point). In this printer, the distance from the print reference position to the position to print is set by
the dot. The length of a dot differs from model to model. In GT408, 8 dots are 0.125 mm, in GT412,
12 dots are 0.083 mm, and in GT424, 24 dots are 0.042 mm.
The initial value of the vertical print position correction is 0 dots, and the horizontal print position
correction is 0 dots.
4
Print position correction setting
V: How many dots vertically away from the print reference position will be the base point for printing will be set.
“+” and “–” are the directions to move.
“+”: Backward for the printing direction
“–”: Forward for the printing direction
H: How many dots horizontally away from the print reference position will be the base point for printing will be set.
“+” and “–” are the directions to move.
“+”: Side of the frame (backward)
“–”: Side of the cover (outside)
OFFSET
V
：
+
0000
H
：
+0000
51
サトー取説_E 04.8.17 6:22 PM ページ 51
Summary of Contents for iGT400 Series
Page 1: ......
