Enable/disable of the external signal input/output will be set.
11
External signal output enable/disable setting
●
Move the cursor with the
/
buttons, and determine with
the button.
• means input/output is permitted.
• means input/output is prohibited.
●
The initial value is DISABLE.
ENTER
ENABLE
DISABLE
About head check function
The head check function works as an indication of head disconnection.
(The time when white patches appear in print and the time when the head check function
works may not be exactly simultaneous.)
As for labels printed after a head error occurs, check them by reading the printed barcodes
with a scanner.
1 When the head check range is set for the print area, the head error message screen will
appear.
2 When the head check range setting is set for the barcode print area, the head error
message screen will appear.
<Measures for head errors>
●
Press the button and button for five seconds, and the print will be resumed
with the head check released.
LINE
FEED
EXTERNAL
SIGNAL
ENABLE
DISABLE
●
Press the button for five seconds, and the head check range setting screen will
appear.
When is selected, the print will be resumed with the head check range
unchanged from the print area.
The head error message screen will appear again.
When is selected, the print will be resumed with the head check range
changed to the barcode print area.
●
Press the button and button for five seconds, and the print will be resumed
with the head check released.
FEED
LINE
FEED
NORMAL
BARCODE
The output type of PREND signal will be set.
12
External signal output type setting
▲
This screen is only shown when input/output of external signal
is permitted.
For details, see SBPL Programming Guide in the attached
accessory CD-ROM.
EXTERNAL
SIGNAL
TYPE1
TYPE2
TYPE3
TYPE4
●
Move the cursor with the , , , and buttons, and
determine with the button.
●
The initial value is TYPE4.
ENTER
62
サトー取説_E 04.8.17 6:22 PM ページ 62
Summary of Contents for iGT400 Series
Page 1: ......
