Printer head
Platen roller
▲
How to clean the printer (2)
With the attached cleaning sheet, clean the following parts
.
Lift up the main cover and printer head unit. Remove the label and the ribbon.
Put the head cleaning sheet between the printer head and platen roller, and lower the head-open
lever of the printer head unit.
Pull the cleaning sheet forward with both hands.
Repeat the procedure two to three times.
This will remove the dirt stuck to the printer head. If any dirt still remains, repeat the process a
few times.
Clean the printer head with the cleaning pen.
Cleaning of printer head and paper sensor
Cleaning printerl head
Cleaning of platen roller
3
4
1
2
* Apply the cleaning sheet in a way that the coarse
side faces the printer head.
* If you are using a carbon ribbon, be sure to remove it
before cleaning
* If you are using a non-separate specification, also wipe off the dirt on the cutter fixed blade with a cleaning
pen.
* If you are using a carbon ribbon, be sure to remove it before cleaning.
Lift up the main cover and printer head unit, and expose the head unit.
Wipe off the dirt on the printer head and paper sensor using a cleaning pen.
Moisten the cotton cloth with cleaning liquid and use the cloth to wipe off the dirt on the platen roller.
3
1
2
92
サトー取説_E 04.8.17 6:23 PM ページ 92
Summary of Contents for iGT400 Series
Page 1: ......
