SATO iGT400 Series, Instruction Manual

Page: 95 / 102

This board enables the printer to exchange data with a computer and/or network.
*If you have any questions, contact the sales outlet, dealer, or service center.
▲ Interface board
The type with the cutter unit mounted on the printer, in order to cut the paper.
▲ Cutter type (factory option)
The type with the simplified peel unit mounted on the printer, in order for labels to be automatically
peeled off from the mounting sheet.
▲
Simplified peel type (factory option)
The type with the peel unit mounted on the printer, in order for labels to be automatically peeled off
from the mounting sheet.
▲ Peel type (factory option)
The type with the cutter unit (for non-separate only) mounted on the printer, in order for automated
printing and cutting of labels without the mounting.
▲
Nonseparate type (factory option)
The type with the internal winding unit mounted on the printer, for automated winding of printed labels.
▲
Label internal winding type (factory option)
The type with the RFID unit mounted on the printer, in order for automated reading/ writing of IC tags
and labels.
▲ RFID type (factory option)
○ Parallel interface board (IEEE1284)
(optional)
○ Serial interface board (RS-232C)
(optional)
○
USB interface board
(optional)
○ LAN interface board
(optional)
○
Wireless LAN interface board
(optional)
○ EXT connector (external signal interface)
(optional)
○
Mini LAN interface board
(optional)
Before installing/removing interface boards, be sure to turn off the printer. Otherwise, the interface boards, or
the printer itself may be damaged.
Caution
Optional add-on peripherals
In order to satisfy the needs of our customers, the following options are available for this printer.
Type of options
XXXXX Inerface
board
90
サトー取説_E 04.8.17 6:23 PM ページ 90