Satec PM130E, Installation And Operation Manual

Page: 48 / 55

Chapter 6 Viewing Status Information 41
Chapter 6 Viewing Status
Information
6.
Through the Status Information Menu (STA) , it is possible to view the
status of various instrument features.
6.1 The Status Information Menu
To enter the Status Information Menu :
From the display mode, press to enter the Primary
Selection Menu .
Press to activate the StA window.
Press .
To select a display page:
Press the up/down arrow keys to scroll through the display
pages.
To quit the menu and return to the display mode:
Press or .
Front Panel Display
When you are in the Status Information Menu , the front panel
display is updated approximately four times per second and shows
you a wide variety of status information that you can review by
scrolling through display pages.
The status parameters are designated by the abbreviated labels in
the upper and/or middle window. The upper window flashes,
indicating that you are in the menu display.
Viewing and Clearing Alarms
Whenever a setpoint signals an alarm, it is latched to non-volatile
memory and remains when the alarm condition disappears.
Alarms which have occurred can be inspected and cleared all
together through the
Status Information Menu . When a number of
alarms are present, use the up and down keys to scroll through all
alarms.
To clear alarms:
From the Status Information Menu, s elect either display page
where an alarm is displayed.
SELECT
StA
ENTER
SELECT
SELECT
ENTER
ENTER ESC