Satec PM130E, Installation And Operation Manual

Page: 32 / 55

Chapter 4 Setup Menus 25
Table 4-5 Setpoint Triggers
(lower window, when middle window is triG )
Code Parameter Unit Range
nonE Setpoint disabled
Phase Reversal
POS.ro. Positive phase rotation reversal
NEG.ro. Negative phase rotation reversal
Real-time Values on any Phase
r. Hi. U High voltage V 0 to Vmax
r. Lo. U Low voltage V 0 to Vmax
r. Hi. C High current A 0 to Imax
r. Lo. C Low current A 0 to Imax
Real-time Auxiliary Measurements
r. Hi.Fr High frequency Hz 0 to 100.00
r. Lo.Fr Low frequency Hz 0 to 100.00
r. U.Unb Voltage unbalance % 0 to 300
r. C.Unb Current unbalance % 0 to 300
Average Values per Phase
A. Hi.C1 High current L1 A 0 to Imax
A. Hi.C2 High current L2 A 0 to Imax
A. Hi.C3 High current L3 A 0 to Imax
A. Lo.C1
Low current L1 A 0 to Imax
A. Lo.C2 Low current L2 A 0 to Imax
A. Lo.C3 Low current L3 A 0 to Imax
Average Values on any Phase
A. Hi. U High voltage V 0 to Vmax
A. Lo. U Low voltage V 0 to Vmax
A. Hi. C High current A 0 to Imax
A. Lo. C Low current A 0 to Imax
Average Total Values
A. Hi.P.i High total kW import (positive) kW 0 to Pmax
A. Hi.P.E High total kW export (negative) kW 0 to Pmax
A. Hi.q.i High total kvar import (positive) kvar 0 to Pmax
A. Hi.q.E High total kvar export (negative) kvar 0 to Pmax
A. Hi. S High total kVA kVA 0 to Pmax
A. PF.LG Low total PF Lag 0 to 1.000
A. PF.Ld Low total PF Lead 0 to 1.000
Average Auxiliary Measurements
Ar neU.C High neutral current A 0 to Imax
Ar Hi.Fr High frequency Hz 0 to 100.00
Ar Lo.Fr Low frequency Hz 0 to 100.00
Present Demands
Hi d.U1
High volt demand L1 V 0 to Vmax
Hi d.U2 High volt demand L2 V 0 to Vmax
Hi d.U3 High volt demand L3 V 0 to Vmax
Hi d.C1 High ampere demand L1 A 0 to Imax
Hi d.C2 High ampere demand L2 A 0 to Imax
Hi d.C3 High ampere demand L3 A 0 to Imax
P E
P E
P E
P E
P E
P E