Satec PM130E, Installation And Operation Manual

Page: 28 / 55

Chapter 4 Setup Menus 21
4.2 Communications Port Setup Menu
This menu allows you to access the communications port options
that the
PM130 uses to communicate with a master computer.
Table 4-2 lists the communications options, their code names and
applicable choices.
Activate the middle window to scroll through the list of available
options, and then activate the lower window to set the option
value.
To select and view a setup option:
Press to activate the middle window.
Use the up/down arrow keys to scroll to the desired option.
The option setting will appear in the lower window.
To change the selected option:
Press to activate the lower window.
Press the up/down arrow keys to scroll to the desired
value.
Press to store the selected value or press
to quit the setup menu.
Table 4-2 Communications Options (
∗
default setting)
Code Parameter Options Description
Prot Communications
protocol
ASCII
∗
rtu
dnP3
ASCII protocol
Modbus RTU protocol
DNP3.0 protocol
rS Interface standard 485 RS-485 (not changeable)
0
∗
-99 ASCII
Powermeter address Addr Address
1
∗
-247 Modbus
0
∗
-255 DNP3.0
bAud Baud rate 110 110 baud
300 300 baud
600 600 baud
1200 1200 baud
2400 2400 baud
4800 4800 baud
9600
∗ 9600 baud
19.20
19,200 baud
dAtA Data format 7E 7 bits, even parity
8n
∗
8 bits, no parity
8E 8 bits, even parity
SELECT
Port
ASCII
Prot
SELECT CHG
ENTER
Port
ENTER
SELECT
ENTER
ESC