SARGENT & GREENLEAF
■
WWW.SARGENTANDGREENLEAF.COM
[t] 800.826.7652
■ 859.885.9411 ■
E-mail: (Information Required)
■
One Security Dr. Nicholasville, Kentucky 40356
S&G TOUCHLESS ADO.docx REV - 08/2021
24
Auto Operator
DOOR
15°
Hinge
o
Do NOT install the primary arm until instructed to do so
•
Attach the spindle to the primary arm:
Insert the large hex bolt and washer into the spindle
adaptor
Then, horizontally slide the adaptor
onto the primary arm until the two
mounting holes of spindle line up
with the corresponding holes on the
primary arm. The spindle is intended
to fit tightly. Secure the spindle
using the two small hex bolts,
BUT
DO NOT OVERTIGHTEN
.
•
Insert the primary door arm and spindle adaptor into the operator at a position where the
primary arm is approximately 10-15 degrees from perpendicular, in the direction of the hinge.
•
Tighten the spindle adaptor to the operator
•
Turn & Slide the primary short arm into the sleeve to the pencil marked position. Tighten the
hex screws within the sleeve once complete
Summary of Contents for Touchless ADO
Page 1: ......
