Network Video Server (Wired LAN) Settings
Access Level Settings
When operating the network video server, you need to select an access level to either limit operations
to only the monitoring of live images or to allow menu settings to be changed as well.
The access level setting depends on the “Username” and “Password” that are typed in after the wired
LAN settings have been made. (p. 13)
The default passwords for each user level are given below. Change the passwords for each access
level as required when using the network video server.
Table 1
Username/password
Access level
For Administrator access level
All operations and settings can be carried out.
Username: ID3
Password: 3333
For Operator access level
The following buttons and the transmission setting menu
can be used. The ALARM DATA LIST screen cannot be
displayed.
Username: ID2
Password: 2222
For User access level
Only the following buttons can be operated.
Username: ID1
Password: 1111
The transmission setting menu in the live image screen is
disabled.
The ALARM DATA LIST screen cannot be displayed.
In order to make it easier to carry out the various video server operations described in this Instruction
Manual, the usernames (
_ID1_
,
_ID2_
and/or
_ID3_
) are indicated in the top-right corner of each page.
For example, if
_ID3_
appears, then the operation is only available at the Administrator level.
L8NAA/XE
(VSP-SV2000P) GB 2003,
5,
12
English
– 21 –
