Sanyo VPC-MZ1 Instruction Manual Download Page 119

Page: 119 / 144

Joining Two Video Clips (Joint)

Display the first video clip.

See “PLAYING BACK VIDEO CLIPS” on page 97.

The second video clip will be attached to the end of this
video clip.

Press the MODE button to display the Playback Setting
Screen.

Select the edit video clip icon

, and press the SET

button.

The Edit Video Screen appears.

Press

on the arrow button to select “JOINT.”

“JOINT” turns orange.

Press the SET button.

The 9-image playback display for video clips appears.

First video clip (displayed now)

Video clip start

Video clip end

Second video clip (to be attached)

EDIT VIDEO

CLIPPING

JOINT

0001 0002 0003

SX212/EX, /E, /U (VPC-MZ1EX, VPC-MZ1E, VPC-MZ1 GB) Fri. July, 06/2001

English

116

Summary of Contents for VPC-MZ1

















































































































































Search results

Summary of Contents for VPC-MZ1

Reviews:

Related manuals for VPC-MZ1

Brands by name

Popular brands

Sanyo VPC-MZ1, Instruction Manual

Search results

Summary of Contents for VPC-MZ1

Reviews:

Related manuals for VPC-MZ1

Brands by name

Popular brands