Sanyo VPC-MZ1 Instruction Manual Download Page 112

Page: 112 / 144

ENTERING TEXT

You can enter characters for titles and the like on still images of resolutions

, or

Display the still image to which you want to add text (see pages 92 to 94).

If the Still Image Playback Setting Screen does not
appear, press the MODE button.

The Still Image Playback Setting Screen appears.

Select the edit still image icon

, and press the SET

button.

The Edit Photo Screen appears.

Select “ADD TEXT.”

“ADD TEXT” turns orange.

Press the SET button.

You enter the preparation screen for text entry.

Press the arrow button to set the location where the first
character is entered. This location can be changed again
later in this procedure (step 11).

If the image has been rotated, it will be returned to its
original orientation.

EDIT PHOTO

ADD PHOTO
ADD AUDIO

ADD TEXT

RESIZE

Edit Photo Screen

SETTING POINT

SX212/EX, /E, /U (VPC-MZ1EX, VPC-MZ1E, VPC-MZ1 GB) Fri. July, 06/2001

109

English

Summary of Contents for VPC-MZ1

















































































































































Search results

Summary of Contents for VPC-MZ1

Reviews:

Related manuals for VPC-MZ1

Brands by name

Popular brands

Sanyo VPC-MZ1, Instruction Manual

Search results

Summary of Contents for VPC-MZ1

Reviews:

Related manuals for VPC-MZ1

Brands by name

Popular brands