Sanyo SCP-7200 Operating Manual Download Page 23

Page: 23 / 84

Using Voice Prompt

This feature allows you to hear voice prompts at Voice Memo, Screen Call setting or
Voice Dial etc. (Default Setting is On).
To deactivate this feature:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight

Settings

and press Menu/OK.

3. Highlight

Sounds

and press Menu/OK.

4. Highlight

Others

and press Menu/OK.

5. Select the menu under

Voice Prompt

and press Menu/OK.

6. Highlight

Off

and press Menu/OK.

Tip

: When ringer volume is set to “Silence All”, voice prompts cannot be heard.

Alert Notification

Your phone comes with several different options to keep you aware of what’s going on by
sounding the alert or ringer.

Service

sets alert On or Off for network services parameter changes.

Voicemail

sets alert to notify you of caller’s message(s).

Messaging

sets alert to notify you of text message(s).

Minute Beep

sets a minute reminder that beeps ten seconds before the end of each

minute during a call.

Signal Fade

sets alert to notify you when your phone loses a signal during a call

To set the alerts:
1. From the Standby mode, press Menu/OK to display the main menu.
2. Highlight

Settings

, and press Menu/OK.

3. Highlight

Sounds

, and press Menu/OK.

4. Highlight

Alerts

, and press Menu/OK.

5. Highlight your desired option, and press Menu/OK.
6. If you selected

Service

Minute Beep

Signal Fade,

select

Off

If you selected

Voicemail

Messaging

, select

Once

Repeat Alert

Off

Tip: Repeat Alert

sounds every two minutes for twenty minutes and the ringer sounds

for ten seconds.

Summary of Contents for SCP-7200





















































































Search results

Summary of Contents for SCP-7200

Reviews:

Related manuals for SCP-7200

Brands by name

Popular brands

Sanyo SCP-7200, Operating Manual

Search results

Summary of Contents for SCP-7200

Reviews:

Related manuals for SCP-7200

Brands by name

Popular brands