Sanyo SCP 5150 - Cell Phone - Sprint Nextel, User Manual

Page: 121 / 180

Section 12
Personal Information Management 113
Pe
rso
nal Information
12
To discard new data:
1.
Press any key when the warning message appears.
2.
Select (right softkey).
3.
Highlight
Yes
and press .
Tip: don’t affect to the downloaded data that you have already
assigned. Because the downloaded data that you have set to wallpaper or
incoming call is not erased.
Using the Downloaded Data
Setting a Downloaded Melody to the Ringer or Start-up/Power-off Tone.
1.
From the Standby mode, press to display the main menu.
2.
Highlight
Downloads
and press .
3.
Highlight
Data List
to display the Downloaded data.
4.
Highlight your desired downloaded melody title and press .
Then starts to play the selected melody.
5.
Press or wait for ending of the melody play.
6.
Highlight
Set Ringer
,
Set St-up Tone
or
Set Pw-off Tone
and
press .
7.
Select the space to assign your selected melody.
If your selected space is already assigned, you are prompted whether
overwrite it or not.
The capacity of downloading is as shown below.
See the SANYO Multimedia Master User Guide included in the SCP-5150
for downloading. Sprint PCS Wireless Web
TM
Connection kit must be
purchased for downloading the data.
Note: If you have no downloaded data, “No Data Downloaded” is shown
on the display.
Tip: It's better to erase the downloaded data that you have already set to
Ringer or Start-up/Power-off tone. See page 115.
Item Maximum Size per Unit Maximum Assignment
Ringer Melody ~20 KB
~100 KB
20 files
2 files
Start-up Tone
Power-off Tone ~20 KB
~20 KB 3 files
3 files
Discard
Replace