Sanyo MIRRO PLS-3810, User Manual

Page: 12 / 126

2 1A. Setting Up Service
⽧
Setting Up Your Phone (page 2)
⽧
Activating Your Phone (page 3)
⽧
Setting Up Your Voicemail (page 3)
⽧
Getting Help (page 4)
Setting Up Your Phone
1.
Install the battery.
䡲
Insert the battery into the opening on the back of the
phone, making sure the connectors align (
), and gently
press it down ( ).
䡲
Position the battery cover and slide it upward until it snaps
into place (
).
2.
Press to turn the phone on.
䡲
If your phone is activated, it will turn on, search for service,
and enter standby mode.
䡲
If your phone is not yet activated, see “Activating Your
Phone” on page 3 for more information.
3. Make your first call.
䡲
Use your keypad to enter a phone number.
䡲
Press .
1A. Setting Up Service
Note Your phone’s battery should have enough charge for your
phone to turn on and find a signal, set up your voicemail,
and make a call. You should fully charge your battery as
soon as possible. See “Charging the Battery” on page 12
for details.