SRT45 Off-Highway Truck
3-6
Safety, Operation and Maintenance Manual
square green claim(see fig3-3.5),
d. Click F1 key to return to the system function
interface.
6. Engine Water Temperature Gauge
Driven by CAN bus; it indicates engine coolant
temperature value. When the pointer is located
in white area said engine coolant temperature
is normal, and once the pointer is located in
red area that engine coolant temperature is too
high, movement, the buzzer for 10 seconds,
then shut down automatically. In the electric
power the same fault buzzer action only once.
7. Engine Oil Pressure Gauge
Driven by CAN bus; it indicates engine oil
pressure value. When the pointer is located in
white area said engine oil pressure is normal,
and once the pointer is located in red area that
engine oil pressure is too high, movement,
the buzzer for 10 seconds, then shut down
automatically. In the electric power the same
fault buzzer action only once.
3.4 Reversing monitor system
The monitor (see Fig 3-4) on instrument panel
is mainly used for monitoring the reversing
truck as well as watching the situation behind
truck. The matching camera is at the rear part
of truck.
Operation instructions:
1.Power supply switch
There are two methods available for turning
on the monitor: The monitor will be turned on
automatically when the transmission gear shift
selector is placed at REVERSE position; press
down the power supply key on monitor to turn
on the monitor, and press again to turn off the
monitor.
The power supply indicator(red) will be on
when the monitor is turned on and it will be off
when the monitor is turned off.
2.Contrast control
（
+
）
（
-
）
Light
Sensor
Mirror
/Normal
Menu
Power
Supply
Power Supply
Indicator
Fig 3-4
SANYI
F1:
ESC
F2:
Enter
F3:
F4:
System Time Setting
2012Y08M13D
12H30M25S
Fig 3-3.5
Controls and Operating
