SRT45 Off-Highway Truck
8-41
Safety, Operation and Maintenance Manual
Maintenance inspection form for 1000hrs(supplement)
Except daily (10hrs) inspection projects, the following projects also have to finish after running 1000hrs.
5. Body
Check the single clearance of brace piece axial pin seat and flange end face of frame .The shims
needs to be increased or replaced when the single clearance is above 1mm………..………
6.Bearing
Check the wearing status for oscillating bearings of steering drag link , replace new one if the
clearance of the bearing S≥ 0.48mm .Conversely, you could continue to use it
……………………………………………………………………………………………...…………
Check the wearing status for oscillating bearings of A-shape arm , replace new one if the
clearance of the bearing S≥ 0.36mm .Conversely, you could continue to use it
……………………………………………………………………………………………...…………
Check the wearing status for oscillating bearings of ends of the A-shape arm , replace new one if
the clearance of the bearing S≥ 0.55mm .Conversely, you could continue to use it
……………………………………………………………………………………………...…………
Check the wearing status for oscillating bearings of steering cylinder , replace new one if the
clearance of the bearing S≥ 0.78mm .Conversely, you could continue to use it
……………………………………………………………………………………………...…………
Check the wearing status for oscillating bearings of front suspension cylinder , replace new one if
the clearance of the bearing S≥ 0.55mm .Conversely, you could continue to use it
……………………………………………………………………………………………...…………
Check the wearing status for oscillating bearings of rear suspension cylinder , replace new one if
the clearance of the bearing S≥ 0.63mm .Conversely, you could continue to use it
……………………………………………………………………………………………...…………
7.Steering
Check screw between steering arm and front suspension cylinder. If loosed or damaged ,tighten or
replace new screw.……..................………………………………………………………..………
Checker
Date
Remarks
Lubrication and Servicing
