1
MEANING OF SYMBOLS
Thank you for purchasing our PNEUMATIC POLISHER TYPE PA-2.
Before use, carefully read this instruction manual for safety and efficient operation
through full understanding of the operating instructions, warnings and cautions as
well as its performance.
Improper handling of this polisher would cause hazardous accidents and injuries.
Hazards and damages that may arise from improper handling are classified into
two categories; WARNING and CAUTION depending on the degree of them.
WARNING
CAUTION
Incorrect handling, that is, failure to follow the warnings and
cautions given in this instruction manual could cause death or
serious injuries of operator.
Incorrect handling, that is, failure to follow the cautions and
instructions given in this instruction manual could cause injuries
of operator or otherwise physical damage.
DECLARATION
DECLARED DUAL-NUMBER NOISE EMISSION VALUES IN ACCORDANCE WITH
ISO 4871
Measured A-weighted sound power level, L
WA
, in decibels
Uncertainty, K
WA
, in decibels
Measured A-weighted emission sound pressure level, L
pA
at
the operator’s position, in decibels
Uncertainty, K
pA
, in decibels
Values determined according to noise test code given in ISO 15744.
Note – The sum of a measured noise emission value and its associated uncertainty
represents an upper boundary of the range of values which is likely to occur in
measurements.
96.9
0.73
85.9
0.73
DECLARED VIBRATION EMISSION VALUE IN ACCORDANCE WITH EN 12096
Measured vibration emission total value a 1.48m/s
2
Uncertainty K 0.32m/s
2
Values determined according to ISO 8662-8.
Summary of Contents for PA-2
Page 2: ......
