Sanwa Kenma PA-2, Instruction Manual

Page: 5 / 23

3
・ WARNINGS AND CAUTIONS FOR SAFETY OPERATION
Proper operation and periodic maintenance are indispensable for long-term use of
this polisher with safety. Carefully read the safety warnings and cautions given in
this instruction manual, and do not start polishing operation and maintenance work
until full understanding of the descriptive contents.
1. GENERAL
This polisher is equipped with rotating parts. During rotation of the polisher, the operator
shall hold the polisher by both hands; one hand grips the grip bar (see Figure 2, 3 and
4, page 6 and 7), another does the polisher body around the switch lever. In any cases
during rotating, anybody shall not touch the rotating parts of the polisher. Holding by one
hand is prohibited because another hand would have risk to touch the rotating parts.
When controlling airflow or water-flow, one hand shall hold the grip bar and another hand
would adjust the airflow control valve or the water-flow control valve under OFF condition.
WARNING
CAUTION
2. OPERATIONAL ENVIRONMENT
･ DO NOT ALLOW ANY OTHER OPERATORS TO ACCESS TO THE POLISEHR
Do not allow any other operators except specific operators to access to the work
place. Particularly be careful not to allow children to access the working area.
･ CAUTION AGAINST EXPLOSION AND FIRE
Do not use the polisher absolutely in potentially explosive atmospheres to prevent
explosion and fire.
･ KEEP A WORKPLACE IN ORDER
Keeping a worktable and peripheries disordered could cause a drop of the
polisher and the fraction is caught in the polisher. This is very hazardous. Be
careful to keep the workplace and its peripheries in order.
3. WORKING CLOTHING AND PROTECTIVE EQUIPMENT
･ WEAR APPROPRIATE PROTECTIVE EQUIPMENT
Operator engaged in polishing operation shall wear protective glasses, safety
shoes, rubber gloves and protective cap. At a dusty place, inhaling dust and
powder could cause respiratory diseases at throat and lungs. Therefore, when
polishing in such an environment, make sure to put a dust mask on. Furthermore,
when using the polisher, put a pair of earplugs on to prevent ear disease.
WARNING