16
CAUTION
･ DO NOT DAMAGE THE FLEXIBLE POLISHING PAD AND THE POLISHER
Careless drop or hit of the polisher against other substances could cause damage,
cracking and deformation of the flexible polishing pad and the polisher. In such a
case, ensure that it is free from such defects before operating. Failure to follow
this caution could cause injuries.
･ PAY ATTENTION TO EXHAUSTING DIRECTION
Exhausted air might contain motor oil, which could cause accidents and / or oil
disease. Take good care not to directly expose the eyes and ears to the
exhausted air.
･ BE CAREFUL NOT TO DAMAGE THE AIR HOSE AND THE FLEXIBLE WATER
HOSE
･ MAKE SURE THAT THE FLEXIBLE WATER HOSE IS CONNECTED TIGHTLY
Failure to do so would possibly result in dry-mode operation due to luck of water,
causing fire and respiratory diseases at throat and lungs.
1. CONNECTION FOR WATER SUPPLY
Connect the flexible water hose to the hose nipple on the polisher body ( see Figure 6,
page 11 ) and to the water source. Adjust the water flow rate by the water-flow control
valve so that the work piece and the flexible polishing pad is cooled enough and that
polishing effect is optimized.
Close
Water-flow Control Valve
Open
Figure 7 Water-flow Control Valve
2. SWITCH OPERATIONS
ON position for polishing
Grip the polisher body with the switch lock while
pushing it frontward together with the switch lever
OFF position to stop polishing Grip off the switch lever
Switch Lever
OFF
ON
Airflow Control Valve
Polisher Body
End Case
Figure 8 Switch Operations
Switch Lock
- Push frontward
release
- Free
lock
Summary of Contents for PA-2
Page 2: ......
