26
Instruction Manual for ASEPT.1X Max
1-888-726-8869
www.sanuvox.com
3. Disconnect the red and yellow wires connected to the door sensor.
NOTE: It may be necessary to remove the disinfection cassette.
STEP 3
4. Remove the detectors and replace them with new detectors:
See
“Magnetic Door Detector Set Installation” on page 6.
5 Turn ON the ASEPT.1X Max by pushing its power button and test the
unit:
See “Operation” on page 20.
STEP 4
STEP 5
How to Clean your Product
For optimal performance, the lamp(s) should be kept free of dust and residue deposit. Clean when necessary with isopropyl
alcohol. Always spot test the cleaner to make sure it does not damage the surface.
CAUTION: Under no circumstance should water be sprayed or splashed onto the product.
ULTRAVIOLETS: UVC
The UVC (254 nm) light produced by Sanuvox UV units and systems is the same UV wavelength produced by the Sun. The
UVC wavelength attacks the micro-organisms on a molecular level deactivating them by destroying their replication function.
Microorganisms that cannot reproduce cannot infect a host. Unlike conventional UV lamps on the market, Sanuvox UV units and
systems use a patented process designed to deliver the maximum UV dosage to surfaces.
CAUTION: Never expose eyes or skin to ultraviolet light from any source.
STORAGE
The ASEPT.1X Max works automatically, and therefore requires no specific storage.
RANGE OF ENVIRONMENTAL CONSIDERATIONS
1) Indoor or outdoor use
Indoor
2) Altitude
< 2,000 m
3) Temperature
10 to 50°C (50 to 122°F)
4) Relative humidity
Non condensing 70%
5) Main supply voltage fluctiations
10%
6) Overvoltage category
II
7) Wet location
N/A
8) Polution degree
N/A
