16
Instruction Manual for ASEPT.1X Max
1-888-726-8869
www.sanuvox.com
5. Tighten the four screws and leave a space of about 1/4" between the
screw head and the plate.
Recommended screw size: 8-32
STEP 5
6. Hang the protective envelope: Align the screws with the holes.
7. Slide the protective envelope to the right until the screw heads reach the
end of the slots.
STEP 6
STEP 7
Slide protective envelope
to the right
1/4" vertical clearance
for all screws
8. Tighten the screws to secure the unit to the ceiling.
STEP 8
9. Connect the power wires via the removed pad: Connect the door sensor
wires.
10. Then connect the power wires (black wire with hot wire, white wire with
neutral, green wire with ground).
STEP 9
STEP 10
