19
Instruction Manual for ASEPT.1X Max
1-888-726-8869
www.sanuvox.com
4. Then, insert the power supply lamp tip into the connector. Push in all the
way so that the metal end is no longer visible.
STEP 4
5. Close the cover and lock it with a flat screwdriver.
Once installation is complete, restore the power supply of the room.
Then,
activate and test your unit before use
: See “Unit Activation” on
page 20.
STEP 5
A room with multiple doors (3).
Example: Connection diagram for door detectors (3) and units (3).
FIG.A
FIG.B
Multiple Units Connected to Multiple Doors
Installing multiple units can be a bit more complicated. Here are some guidelines to help you. However,
it is strongly recommended
to contact Sanuvox customer service (see last page) for assistance and advice for your specific installation.
IF A ROOM HAS MULTIPLE DOORS (FIG. A):
1.
Each door has its detector.
2.
All detectors are connected in series.
IF A ROOM HAS SEVERAL ASEPT.1X MAX (FIG. B):
1.
The door detectors are connected in series with each other.
2.
The door detectors are connected in parallel on the units to maintain the same 3.3V voltage.
Door Detector
Door Detector
Door Detector
Door Detector
Door Detector
Door Detector
