7-4
ECL-210 Operation Manual
9-2Å@ìdå
π
ìäì¸ï˚ñ@/ÉfÉäÉ~É^ÇÃê›íË
5) GP-IB delimiter is displayed.
6) [RS-232C] is displayed.
7) RS-232C delimiter is displayed.
8) All the indications and LEDs are lit.
9) The system confirms the state of unit inserted.
If the units are inserted, the parameter is displayed. If not, [non] is displayed.
7.2.3. Setting MLS RS-232C Delimiters
MLS RS-232C delimiters can be changed by pushing [CHANNEL], [MODE] keys in
power on. In the state of power waiting, turn power on with keeping pushing the either or both
buttons, so that RS-232C can be changed. The start-up movement is the same as 7.2.1. After
proper start-up, the delimiter setting is maintained even when power to the unit is turned off.
[CHANNEL]
: CR
[MODE]
: LF
[C[MODE]
: CR/LF (Push the both)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com