EXTERNAL CAVITY TUNABLE LD LIGHT SOURCE ECL-210
11-3
11-3 Blank Cover
11-3-1. Introducation
A blank cover is for closing the ventilation from slot insertion of MLS and the ventilation hole
inside MLS. Each unit is designed that the air fro cooling flows from the slot bottom inside
MLS towards the upper parts. Without blank cover, the flow of the air for cooling is blockedd
and heat dissipation is not fully performed.
11-3-2. Procedure
To install/uninstall the blank cover, please follow the following procedure.
Installation
(1) Insert a blank cover along with the guide of the slot insertion part of MLS.
(2) Insert it firmly to the back and fix it witht the fixed screw at the upper left of the unit.
Uninstallation
(1) Loosen and remove the fixed screw at the upper left of the unit.
(2) When empty slot is made insert new unit or avoid prolonged use.
(3) Please store the blank cover without bending the plate.
If the plate of a blank cover has bent or damaged normal operation may not be able to
be performed. Please store the blank cover undamaged.
NOTE
If empty slot is made insert a blank cover. Otherwise normal operation may not be able
to be performed.
NOTE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
