3-6
ECL-210 OPERATION MANUAL
ECL controls OBPF and FLF independently against wavelength input. When some compensa-
tion is required after wavelength stable, it is possible to control only FLF independently.
On the usual system, when units are required to be exchanged or to be added, the stable system
must be down, and be exchanged or added, then, the system must be start up. However, it is
possible to be plugged in and out with power on. In this case, re-start of the system is unneces-
sary only by the warm-up of the added unit. (Refer to 7.16. Plug and Play)
GP-IB, RS-232C* are equipped with this system. The structuring various systems is possible
by external communication control.
* RS-232C is an option.
3-6 Fine Wavelength Tuning Control
3-7 Plug & Play
3-8 Communication Interface
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
