Sanremo CAFE RACER CR2, Instruction Booklet, Page: 33 / 134

CAFÈ RACER
33
Commissioning
EN
try heating the water.
Repeat the same operation with the spout on
the other side of the machine.
- Attach the portafilters (9) to the group heads,
position the cups underneath and perform a few
deliveries, enabling the three brewing settings
using the corresponding buttons (10).
Check correct delivery of water into the cup.
-
IMPORTANT: We recommend the
following maximum quantities:
• 100 cc maximum continuous
delivery of coffee for each group
• 500 cc maximum continuous
delivery of hot water
• 30 seconds continuous delivery
of steam.
Check that the pump pressure indicated on the
display (2) after delivery is about 130 PSI.
-
IMPORTANT: Check that pump
pressure during delivery is
between 8 and 9 bars (116-130
PSI). If pressure is not within
this range, it must be adjusted.
To adjust, contact technical
assistance.
Turn the machine off by pressing button (1), the
displays go off. Close the water supply tap.