Sanremo CAFE RACER CR2, Instruction Booklet, Page: 26 / 134

CAFÈ RACER
26
Connections
EN
8 CONNECTIONS
8.1
IMPORTANT: the machine must
be connected by a specialised
authorised technician.
WATER CONNECTION
Drain
Near the machine there must be a drain (1) with
siphon.
The drain siphon must be
located at least 7,9 inch below
the surface on which the
machine stands.
Connect one end of the shortest drain hose(4)
to the drain coupling on the machine (5) and
the other end to the coupling on the tray (3) and
fixwith the hose clips (6).
- Connect one end of the longest drain hose (2) to
the coupling (3) on the tray and the other end to
the drain (1) prepared previously.
The machine must be connected
to a mains water supply
providing appropriately softened
drinking water with a maximum
hardness of 3.5/5 French degrees
(60/85 ppm). Make sure the
supply pressure does not exceed
6 bars (87 PSI). If the pressure
is greater, install a pressure
reducer.
Filling
Filling (for version with built-in pump)
- Connect the intake hose (7) to a water softer (8),
interposing the water purifying filter (9) supplied
- Install a splitter tap (10) before the water
softener (8), to separate the machine from the
mains water supply.