SANDVIK CH420:01, Installation Manual

Page: 13 / 110

1. Introduction
11 CH420:01 © Sandvik SRP AB – Doc. no. S 223.510 en Ver. 1
1.1.1 Document information
Purpose of this Installation manual
The purpose of this Installation manual is to provide the technicians with
information on how to safely install this Sandvik equipment.
It is important to:
• keep the manual for the lifetime of the equipment
• pass the manual on to any subsequent holder or user of the equipment
Document compliance
The instructions in this document are in accordance with the design and
construction of the equipment at the time it was delivered from the Sandvik
manufacturing plant.
Technical publications
When ordering technical publications, always specify the language and quote
the identity and manufacturing numbers from the identification plate.
Technical publications related to the installation and operation of this
equipment are:
• Installation manual (IM)
• Wear parts catalog (WPC)
• Operator’s manual (OM)
Technical publications related to the maintenance of this equipment are:
• Maintenance manual (MM)
• Spare parts catalog (SPC)
The MM and SPC are only available to trained maintenance personnel.
Sandvik can provide adequate training and authorize personnel.
Read more about the document structure and the accompanying work roles
in
section 2.2 Personnel .
Number of pages
This document contains a total of 106 pages.
Feedback
If you have comments on this manual or problems related to the crusher’s
documentation, send an e-mail to: manuals.srp@sandvik.com