SANDVIK CH420:01, Installation Manual

Page: 73 / 110

5. Transport handling
71 CH420:01 © Sandvik SRP AB – Doc. no. S 223.510 en Ver. 1
5.5 Unpacking the goods
a) Remove any loose boxes and packages before unpacking the main
components.
b) Unpack and check each item against the delivery note.
c) Check the unpacked components and accessories for damage. In case of
damage, send a transport damage report to Sandvik SRP AB.
See also
section 5.3.2 Inspection of goods .
d) Open the tool box and remove the documentation.
e) Locate the packing list.
f) Check that the data on the cone crusher and tank unit identification
plates correspond with the packing list.
See
section 1.1 Equipment information .
g) Move spare and wear parts to the spare part store.
h) Dispose of the packaging material according to the instructions in
section 5.6 Disposal/return of packaging material .
WARNING!
Hanging load
Keep clear of hanging loads. See section 2. Safety precautions .
Make sure that the SWL (Safe Work Load) of the lifting equipment is
sufficient for the weight to be lifted.