COMe-cEL6 - User Guide, Rev.1.3
// 78
Sub-screen
Next Level Sub-screens / Description
System Agent
(SA)
Configuration>
(continued)
Memory
Configuration>
(continued)
Memory
Thermal
Configuration>
(continued)
Memory Power
and Thermal
Throttling>
(continued)
Refresh_
2X_
Mode>
[Disables, 1- Enabled for
Warm or Hot, 2-
Enabled Hot only]
DDR4
Thermal
Sensor>
When enables MC uses
MR4 to read DDR4
thermal sensors
[Enabled, Disabled]
Self
Refresh
Enable>
[Enabled, Disabled]
Memory Thermal
Management>
[Enabled, Disabled]
Read only field
Memory configuration: RC Version, Date rate and Timings.
Slot information (populate (size, rank, manufacturer), not populated)
Memory ratio and clocking/overclocking
MCR ULT Safe
Config.>
MCR ULT safe Configuration for P0
[Enabled, Disabled]
Safe Mode
Support>
Used for changes that may affect a stable MRC
[Enabled, Disabled]
Maximum
Memory
Frequency>
Maximum frequency (MHz) must divide by 133 or 100
according to RefCLK. In GEAR2 must divide by 2666 or
200. Lowest GEAR2 speed is 2133.
[Auto, 1067, 1200….. 4200, 4267
Max TOULD>
Dynamic assignment adjusts TOLUD automatically
based on the largest MMIO length
[Dynamic, 1GB, 1,25 GB, 1.5 GB….. 3.35 GB, 3.5 GB]
SA GV>
System Agent Geyserville enables/disables frequency
switching or fix to a specific point.
[Disable, Fixed Low, Fixed Mid, Fixed High, Enabled]
Enables RH
Prevention>
Actively prevent row hammer
[Enabled, Disabled]
Row Hammer
Solution>
Method to prevent row hammer
[2x refresh]
Power Down
Mode>
CKE power Down Mode Control
[Auto, No Power Down, APD, PPD-DLLoff]
Memory
Scrambler>
Enables/ disable memory scrambler support
[Enabled, Disabled]
Force ColdReset> Force Coldreset or Choose MrcColdBoot mode, when
Coldboot is required during MRC execution- If ME 5 MB,
Force Coldreset is required! [Enabled, Disabled]
Memory Remap>
Memory remap above 4 GB
[Enabled, Disabled]
Fast Boot>
Fast path through the MRC [Enabled, Disabled]
