S&T kontron COMe-cEL6, User Manual, Page: 88 / 99

COMe-cEL6 - User Guide, Rev.1.3
www.kontron.com // 88
Sub-screen Next Level Sub-screens / Description
PCH/IO
Configuration>
(continued)
Extended BIOS
Range Decode> Enable: redirects memory cycles falling in a specific area to SPI flash
controller.
[Enabled, Disabled]
Sub-Screen Next level Sub-screens / Description
IGD
Configuration>
Data Format> Read only field
[EDID 1.4 ]
Resolution> Read only field
[1024x768 ]
Color Depth> Read only field
[24 bit ]
Channel Count> Read only field
[Single Channel]
eDP Port Configuration
eDP Port> [Enabled, Disabled]
Integrated eDP to LVDS Bridge> [Disabled, Auto]
LFP Resolution> Selects the LFP used by internal graphics device:
[Auto, Custom, PAID, VGA 640x480 1x18
WVGA 800x480 1x18, SVGA 800x600 1x18
XGA 1024x768 1x18, XGA 1024x768 1x24
WXGA 1280x768 1x24, WXGA 1280x800 1x18
WVGA 1366x768 1x24, WSVGA 1280x600 1x18
WSVGA 1280x600 1x24]
Backlight Control> Backlight control setting.
[None/External, PWM, PWM Inverted, I2C, I2C Inverted]
PWM Frequency> Set LCD backlight PWM frequency.
[200 Hz, 400 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 20 kHz, 40 kHz]
Backlight Value> Set LCD Backlight brightness (1-255). [255]
LVDS Clock Center Spreading> Select the LVDS Clock frequency center spreading depth
[No Spreading, 0.5%, 1.0%, 1.5%, 2.0%, 2.5%]