
COMe-cEL6 - User Guide, Rev.1.3
// 67
Sub-screen
Next Level Sub-screens / Description
Power and
Performance>
(continued)
CPU Power
Management>
(continued)
Custom P-
State Table>
Sets the number of customer P-states. At least 2
states must be present. [0]
Power Limit 3
Settings>
Read only field
CPU Lock
Configuration>
CFG Lock>
Configure MSR E2h[15], CFG lock bit
[Enabled, Disabled]
Overclocking
Lock>
Over clocking lock (Bit 20) in
FLEX_Ratio (194) MSR
[Enabled, Disabled]
GT- Power
Management
Control>
RC6 (Render
Standby)>
Checks Enable render standby support
[Enabled, Disabled]
Maximum GT
Frequency>
Maximum GT frequency limited by user
Choose between 200 MHz (RPN) and 850 MHz (RPO).
Value beyond the range clipped to supported
min/max
[Default Max Frequency, 100MHz, 150MHz, 200MHz
,..........1150MHz, 1200MHz]
Disable Turbo
GT Frequency>
Enable or Disables the GT frequency, disable is not
limited [Enabled, Disabled]
Sub-screen
Next Level Sub-screens / Description
PCH-FW
Configuration>
Read Only field
Firmware: version, mode, SKU, States 1, Status 2
ME State>
When disables ME goes into ME Temporarily Disabled Mode
[Enabled, Disabled]
ME Unconfig on
RTC Clear>
When disables ME will not unconfigured on RTC clear
[Enabled, Disabled]
Extended CSME
Measured to
TPM-PCR>
Read only field
[Enabled, Disabled]
Core BIOS Done
Message>
Enables or disable the core BIOS Done message sent to ME
[Enabled, Disabled]
Firmware Update
Configuration>
ME Firmware
Image Re-
flash>
Enables or disables the ME firmware image RE-
flash function
[Enabled, Disabled]
FW Update>
Enables or disables the ME firmware update
function
[Enabled, Disabled]
PTT
Configuration>
TPM Device
Selection>
Selects PTT, or dTPM]
PTT enables PTT in SKuMgr dTPM
1.2 warning - Disabled PTT in
SKuMgr
Disables PTT/dTPM and all data
saved on it is lost. [dTPM, PTT]
Anti-Rollback
SVN
Configuration>
Automatic
Hardware
Enforced
Anti-rollback
SW>
Anti-rollback automatically active
once ME FW successfully runs on
platform. Firmware with the
lower ARB-SVN is blocked from
execution
[Enabled, Disabled]