S&T kontron COMe-cEL6 User Manual Download Page 70

Page: 70 / 99

COMe-cEL6 - User Guide, Rev.1.3

www.kontron.com

// 70

Sub-screen

Next Level Sub-screens / Description

ACPI D3Cold
Settings>
(continued)

USB Port 2>

USB RTD3 support for super speed USB 3.1 and high speed USB 2.0
devices [Enabled, Disabled]

ZPODD>

Zero power ODD (ZPODD) only for boar with SPODD support
[Enabled, Disabled]

WWAN>

Read only field
[D0/L1.2]

SATA Port 0>

Control the SATA port RTD3 functionality
[Enabled, Disabled]

SATA Port 1

Control the SATA port RTD3 functionality
[Enabled, Disabled]

SATA Port 2>

Control the SATA port RTD3 functionality
[Enabled, Disabled]

SATA Port 3>

Control the SATA port RTD3 functionality.
[Enabled, Disabled]

SATA Port 4>

Control the SATA port RTD3 functionality.
[Enabled, Disabled]

SATA Port 5>

Control the SATA port RTD3 functionality.
[Enabled, Disabled]

PCIe Remapped
CR1>

PCIe RTD3 setup conflicts with SATA RTD3.
[Enabled, Disabled]

PCIe Remapped
CR2>

PCIe RTD3 setup conflicts with SATA RTD3.
[Enabled, Disabled]

PCIe Remapped
CT3>

PCIe RTD3 setup conflicts with SATA RTD3.
[Enabled, Disabled]

Sub-screen

Next Level Sub-screens / Description

PCIE
Configuration>

IMR
Configuration>

PCIe IMR>

[Enabled, Disabled]

Sub-screen

Next Level Sub-screens / Description

Trusted
Computing>

Read only field
TPM 2.0 device, Firmware version, Vendor
Security Device
Support>

BIOS support for security device. OS will not show security device. TCG
EFI protocol and INT1A interface will not be available.
[Enabled, Disabled]

Active PCR
Banks>

Read Only Field
[SHA256]

Available PCR
Banks>

Read only field
[SHA-1, SHA256, SHA384, SM3]

SHA-1 PCR Bank>

[Enabled, Disabled]

SHA-1 PCR Bank>

[Enabled, Disabled]

SHA256 PCR
Bank>

[Enabled, Disabled]

SH3_256 PCR
Bank>

[Enabled, Disabled]

Summary of Contents for kontron COMe-cEL6




































































































Search results

Summary of Contents for kontron COMe-cEL6

Reviews:

Related manuals for kontron COMe-cEL6

Brands by name

Popular brands

S&T kontron COMe-cEL6, User Manual

Search results

Summary of Contents for kontron COMe-cEL6

Reviews:

Related manuals for kontron COMe-cEL6

Brands by name

Popular brands