S&T kontron COMe-cEL6, User Manual, Page: 83 / 99

COMe-cEL6 - User Guide, Rev.1.3
www.kontron.com // 83
Sub-screen Next Level Sub-screens / Description
PCH-IO
Configuration>
(continued)
SATA
Configuration>
SATA Controllers> [Enabled, Disabled]
SATA Port Multiplier> Determines how the SATA controllers(s) operate
[AHCI]
SATA Mode Selection> [Enabled, Disabled]
SATA Test Mode> [Enabled, Disabled]
Software Feature
Mask Configuration>
Software Feature
Mask Configuration>
(continued) HDD Unlock> Enabled: Indicates HDD
password unlock in OS is
enabled
[Enabled, Disabled]
LED Locate>
LED Locate>
(continued) Enabled: Indicates
LED/SGPIO hardware is
attached and ping to
locate feature is enabled
on OS
[Enabled, Disabled]
Aggressive LPM
Support> Enable PCH to aggressively enter link power state
[Enabled, Disabled]
Serial ATA> Read only field
CT120BX500SSD1 (120.0 GB)
Software Preserve> Read only Field
SUPPORTED
Port [#]> Enable or disable the SATA port [0 or 1]
[Enabled, Disabled]
Hot Plug> Designates port as hot pluggable
[Enabled, Disabled]
Configure as eSATA> Read only Field
Hot Plug Supported
External> Marks port as External
[Enabled, Disabled]
SPIN Up Device> Enable staggered spin up performed only on drives
with option enabled spin up at boot. Otherwise all
drives spin up at boot
[Enabled, Disabled]
SATA Device Type> Identified the drive type
[Hard Disk Drive, Solid State drive]
Topology> Identify the SATA topology
[Unknown, SATA, Direct Connect, Flex, M2]
SATA Port 0 DevSLP> For DevSLP both hard drive and SATA port need to
support DevSLP function otherwise, unexpected
behavior might happen. Check module design
before enabling.
[Enabled, Disabled]