COMe-cEL6 - User Guide, Rev.1.3
// 73
Sub-screen
Next Level Sub-screens / Description
Hardware
Monitor>
(continued)
External Fan>
Fan Control>
Sets fan control mode where disable totally stops the fan.[Disabled,
Manual, Auto]
Fan Pulse>
No. Pulses the fan produces during one revolution (range 1 to 4)
[2]
Fan Trip Point
Speed>
Temperature at which the fan accelerates (range 20 to 80 C)
[50]
Trip Point
Speed>
Fan speed at trip point in % (30 Min.) Fan always runs at 100% at
TJMax 10 C.[50]
Reference
Temperature>
Determines the temperature source used for automatic fan control
[CPU temperature, Module temperature]
5.0V Standby>
Read only field
[5.2 V]
Menu Batt Volt at
COMe Pin>
Read only field
[3.02 V]
Wider Range
VCC>
Read only field
[12.22 V]
Sub-screen
Next Level Sub-screens / Description
UEFI Variables
Protection>
Password
Protection of
Runtime
Variables>
Controls NVRA; runtime variable protection through system admin
Password.
[Enabled, Disabled]
Sub-screen
Next Level Sub-screens / Description
Serial Port
Consol
Redirection>
COM1(PCI Bus0, Dev30, Func1, Port1) (disabled)
Console Redirection Port is disabled
COM2(PCI Bus0, Dev0, Func0) (disabled)
Console Redirection Port is disabled
Serial port for out of Band management/Windows emergency Management Services (EMD)
Console
Redirection EMS>
[Enabled, Disabled]
Sub-screen
Next Level Sub-screens / Description
AMI Graphics
Output Protocol
Policy>
Read only field
Intel® Graphics Controller / Intel® GOP Driver
[18.0.1031]
Output Select>
Selects output Interface
[eDP1, DVI1]
Bist Enable>
Starts of stops BIST on the integrated display panel
[Enabled, Disabled]
Sub-screen
Next Level Sub-screens / Description
SIO Common
Settings>
Lock legacy
resource>
[Enabled, Disabled]
Sub-screen
Next Level Sub-screens / Description
SIO
Configuration>
Active Serial
port>
Use this Device
Enable or disable use of this logical device
[Enabled, Disabled]
