S&P ECOWATT PLUS CRHB 400 N, Manual

Page: 13 / 40

13
EN
1. INTRODUCTION
Thank you for purchasing this appliance. It has been manufactured in full compliance with applicable safety regulations
and
EU standards. Please read this instruction book carefully, as it contains important information for your safety during
the installation, use and maintenance if this product.
Keep it at hand for future reference.
Please check that the appliance is in perfect condition when you unpack it, as all factory defects are covered by the
S&P
gua rantee.
2. SAFETY REGULATIONS AND “CE” MARKING
S&P technicians are firmly committed to research and development of ever more efficient products and in compliance
with current safety regulations.
The instructions and recommendations given below reflect current regulations, principally regarding safety, and the-
refore are based on compliance with general regulations. Therefore, we recommend all people exposed to hazards to
strictly follow the safety regulations in force in your country.
S&P will not be held liable for any possible harm or damage
caused by non- compliance with the safety regulations, as well as caused by modifying the product.
The CE mark and the corresponding declaration of conformity are proof of the product’s conformity with current
EU
regulations.
3. GENERAL INSTRUCTIONS
A hazard analysis of the product has been carried out as provided in the Machine Directive. The manual contains in-
formation for all personnel exposed to these hazards, with aim of preventing possible harm or damage due to faulty
handling or maintenance.
All maintenance operations (ordinary and extraordinary) must be carried out with the machine switched off and the
electrical power supply disconnected.
Before connecting the power supply cable to the terminal strip, make sure the mains voltage corresponds to the voltage
indicated on the specifications plate of the unit.
4. DESCRIPTION
4.1. LOCATIONS
CRHB-N
Pressure taps
Pressure taps
CRVB-N