SANCH S3800C Series, User Manual

Page: 78 / 105

７５
0: Invalid
2: Torque limit control:with Force-to-stop if
actual deceleration time exceeds three
times the specified one
3: DC link bus voltage control:with
Force-to-stop if actual deceleration time
exceeds three times the specified
One
4: Torque limit control:with Force-to-stop
invalid.
5: DC link bus voltage control with
Force-to-stop invalid.
０４． ６９
04 Advanced functions Parameters
Control Method
Setting Range
V/f
Wit-
hout
PG
PG
V/f
PG
Para-
meter
Parameter
Functions
Fact-
ory
Defa-
ult
Torque
control
× ○ ○ ○ ○
Overvoltage Autom-
atic Deceleration
action selection
０．０
○ ○ ○ ○ ×
９９９ ○ ○ ○ ○
×
０
１
○ ○ × × ×
○ ○ ○ ○ ○
０
○ ○ ○ ○ ○
0 : Invalid 1 : valid action
0 : Invalid 1 : valid action
0.00: Follow the deceleration time selected,
0.01~100.00 Hz / s, 999 ( cancel )
0: valid in acceleration and deceleration,
valid at constant speed
1: invalid in acceleration and deceleration,
valid at constant speed
2: valid in acceleration and deceleration,
invalid at constant speed
0: Motor-generating torque limit
1: Torque current limit
2: Output power limit
0: drive / brake
1: 4 quadrants are same
2: Upper limit / Lower limit
０４． ７０
Overload prevention
control
０４． ７１
Deceleration
characteristics
０４． ７２
Main power failure de-
tection mode selection
０４． ７３
Torque Limiter oper-
ating conditions
selection
０４． ７４
Torque Limiter:torque
control target
１
× × ○ ○ ○
０
× × ○ ○ ○
１００ × × ○ ○ ○
５．０ × × × ○ ○
０４． ７５
Torque Limiter : torque
control target quadrant
－
○ ○ ○ ○ ○
０ ○ ○ ○ ○ ○
○ ○ ○ ○ ○
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ８７６０
0.0~500.0Hz
０４． ７６
Torque Limiter :
Frequency increment
limit for braking
0~8760 (10 hours as a unit)
０４． ７７
Service Life of DC link
bus capacitor
remaining time)
0.00~1.00
0000~FFFF (hexadecimal)
0000~FFFF (hexadecimal)
０４． ８０
０４． ８１
０４． ８２
Output Current
Fluctuation Damping
Gain for Motor 1
０．２０
× ×
○ ○ ○
100~400%
０４． ８４
０．００ × × ○ ○ ○
0.00(invalid)
；
0.01~30.00s
０４． ８５
Pre-excitation initial
value
Pre-excitation time
０
－ － － － －
－ － － － －
－ － － － －
0~2
０４． ８６
For Manufacturer to
use
２５．０
０
25.0~500.0Hz
0~3; 999
０４． ８７
０４． ８８
For Manufacturer to
use
For Manufacturer to
use
0 ( invalid ) ;
1 to 9999 ( 10 hours as a unit))
０４． ７８
Maintenance
Interval setting (M1)
0000 (invalid ); 0001~FFFF (hexadecimal)
０４． ７９
Preset Startup
Count for Maintenan-
ce(M1)
Light alarm selection 1
Light alarm selection 2 0
0