Users can set the function parameter values to control and apply various functions of S3800C series
inverter. Before starting to narrate this chapter, first describe function parameter format as follows:
■
Changing, validating, and saving function parameters data when the inverter is running
Function parameters are indicated by the following based on whether they can be changed or not
when the inverter is running: The following table shows the symbolic meaning of "change when
running" column in the function parameter list after the next page.
■
Using negative logic for programmable I/O terminals
To set the negative logic system for an input or output terminal, enter data of 1000s (by +1000 to the
data for the normal logic) in the corresponding function parameters.
For example, in the case of selecting Jogging command [mJOG] through function parameter 01.01,
the relationship between the setting parameter and the corresponding action is as follows:
If the data of the parameters marked with is changed with and
keys, the change will immediately take effect; however, the change is not
saved into the inverter's memory. To save the change, press the key.
If you press the key without pressing the key to exit the current
state, then the changed data will be discarded and the previous data will
take effect for the inverter operation.
Even if the data of the parameters marked with
�
is changed with and
keys, the change will not take effect. Pressing the key will make
the change take effect and save it into the inverter's memory.
00
Then function parameters are classified as follows:
00
．
06
07
08
09
10
11
00
01
02
03
04
05
Basic functions
External terminal functions
Control functions
Motor 1 parameters
Advanced functions
Motor 2 parameters
Parameters
Function
Motor 3 parameters
Motor 4 parameters
Application function 1
Application function 2
Application function 3
Serial communication function
Parameters
Function
5.1 Function Parameters List
Mark
Change when
running
Validating and saving function parameters data
possible
(current state)
possible
( after
confirmation)
５５
Function parameter
Category
5.FUNCTION PARAMETERS LIST
