44
6. Respond messages
This chapter shows you how to read and understand the different response messages sent from GX-101. Basically,
there’re 7 different situations that trigger the GX-101 to response its position (
Auto Report, SMS Polling, Park, Move,
Geofence, I/O, Power-cut, SOS, Low power
) and are shown in the following pages.
Event Table:
This event table helps you to know what event triggers the response.
Event
Descriptions
AUTO
When the monitor sends a valid Auto Report command to GX-101, it will send a
report including an “Auto” behind each GPRMC sentence.
I/O alarmed
When the GX-101’s I/O is triggered, it will reply a report with the number if I/O
MOVE
When GX-101 exceeds the speed limit in Park mode, it will trigger the “Move”
event and start sending report according to the setting.
POLL
When using the SMS to poll the report, the event will be “poll”.
GFIN
When GC-101 enters the geofence area, it triggers the “GFIN” event.
GOUT
When GC-101 moves out from the geofence area, it triggers the “GOUT” event.
PARK
When the park function is triggered, GX-101 will send a report with “PARK” at the
report ended
UNPARK
When to deactivate function, GX-101 will send a report with “UNPARK” at the
report ended.
Power-cut
When the power of GX-101 is cut, GX-101 will send a report with “Power-cut” at
the report ended.
SOS
When Panic button is pressed, the report sent from GX-101
Power low and DC
adapter is unplugged
When GX-101’s power is low, the report sent from GX-101