18
4.9 Set up An E-mail Address to Receive The Data
In addition to receiving data from URL, you can also obtain data from a specified E-mail address via GPRS service. After
setting up the APN, you can also define an E-mail address to receive data by following the instruction below, please note
that, since processing the transformation from APN to E-mail address might cost longer time, so receiving data from URL
is still recommended.
Setup format
：＃「
username
」
,
「
Password
」
,
「
Function Code
」
,
「
Email address
」＊
Example
：＃
username,0000,12,mail@San Jose.com
＊
The table 4.9.1 describes the meaning of each segment in the message above.
Table 4.9.1
The table 4.9.2 shows each confirmation message reply after setup.
Table 4.9.2
Text Keyed In SMS
Description
# Start
sign.
username
Default ID of GX-101.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
12
Mode 12 defines to setup an E-mail address data to a specific website
mail@San Jose.com
The E-mail address that receives the data.
* End
sign.
Situation
Message Reply
Setup Succeeds
[username] + mail address Setup OK.
Setup Fail
[username] + mail address setup fail.
GX-101 is in Emergency Mode
[username] + in emergency, Mail address setting is not allowed.
Incorrect password
[username] + Password setup Fail!
Incorrect username or command format [username] + command error
GX-101 is in Emergency Mode
[username] + in emergency, Mail address setting is not allowed.
