16
4.7 All Parameters Reset to Default
Use this SMS message to reset GX-101 to factory default. You can just send the SMS according to the example seen below.
It will overwrite all the current parameters to default.
Setup format
：＃「
username
」
,
「
Password
」
,
「
Function Code
」＊
Example
：＃
username,0000,9
＊
The table 4.7.1 describes the meaning of each segment in the message above.
Table 4.7.1
The table 4.7.2 shows each confirm message reply after setup.
Table 4.7.2
Text Keyed In SMS
Description
# Start
sign.
username
Default ID of GX-101.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
9
Mode 9 defines to change all the parameter to default value
* End
sign.
Situation
Message Reply
Setup Succeeds
[username] + Setup OK. GX-101 resets to default
Setup Fail
[username] + Reset Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or command format [username] + command error
GX-101 is in Emergency Mode
[username] + in emergency, reset to default is not allowed.
