29
4.19 Power Cut Detection And Detection Time Report
The user can use this command to set power cut detection and detection report interval GX-101 should reply.
Setup format
:#「
username
」
,
「
Password
」
,
「
Function Code
」
,
「
intervals (sec)
」
,
「
Total number of report
」*
Example:
#
username,0000,20,60,0
*
Note: When the total number of report is set “0”, power cut detection will be disabled.
Table 4.19.1 The explanation of each segment.
Table 4.19.2 The reply when the setting successes
Text Keyed In SMS
Description
#
Start sign.
username
Default ID of GX-101.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
20
Mode 20 is to set power cut detection and report interval
Interval(sec)
Maximum 65000 seconds
Total number of report
1-9998 times; 9999
* End
sign
Situation
Description
Success when number of
report is 0
username, setup ok. Device power cut notification is disabled
Success
username, setup ok. Device power cut notification is enabled