Sanav GX-101 Manual Download Page 40

Page: 40 / 48

5.4 Complete The Mode Setting

This part is to define the mode of GX-101. In this part, the user has to set voice polling mode, router and speed limit. When

the setting is completed, please click on Save to confirm setting then click on Load

to make sure that the setting has

already been written. Once the setting is done, click on Close

get off the AP window.

8. Voice Polling

0: Voice Talk; if it’s set to “0”, when the user dials the SIM number at the GX-101, they can talk with the GX-101

holder directly. Please note microphone has to be connected to GX-101.

1: Dial Polling; if it’s set to “1”, when the user dials the SIM number at the GX-101, GX-101 will send a report of

current position to assigned router

11. Speed: to define the speed limitation. When the park function is activated, if the speed is over the defined limitation,

GX-101 will start to send the report of position of assigned router. Please note the value is from 2-99 Knot.

Note: 1knot=1.85km; 1knot=1.15mile

14. Router: to define the report router. There are nine routers are offered. For the detail, please refer to 4.11.

Summary of Contents for GX-101

















































Search results

Summary of Contents for GX-101

Reviews:

Related manuals for GX-101

Brands by name

Popular brands

Sanav GX-101, Manual

Search results

Summary of Contents for GX-101

Reviews:

Related manuals for GX-101

Brands by name

Popular brands