28
4.18 Setup Geofence Coordinate
Users can setup the Geofence by using this command. The Geofence is defined as a round area. Therefore, the
coordinates is the center and the radius is defined in meter.
Command: #username,0000,gf,2458.9741,N,12125.6460,E,500,1~3*
Geofence Alarm Report:
Command: #username,0000,17,0~30000,0~9999*
Text Keyed In SMS Description
#
Start sign.
username
Default ID of GX-101.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
gf
Mode gf means Geofence setup mode
2458.9741
Latitude
N
N = North, S = South
12125.6460 Longitude
E
E= East , W= West
500
500 meters in radius
0
It will cancel the geofence.
1
It will trigger the alarm when the tracker is outside of the geofence.
2
It will trigger the alarm when the tracker is inside of the geofence.
0~3
3
It will trigger the alarm when the tracker is either outside or inside of the
geofence.
* End
sign.
Text Keyed In SMS
Description
#
Start sign.
username
Default ID of GX-101.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
17
Mode 17 defines to set the geofence report interval
0~30000
Time interval in second
0~9999
Total report. Note that 9999 means infinite reporting.
* End
sign.
