MP9311 User’s Guide
10
Low-Power UHF Antenna Installation
The MP9311 is designed to operate with the SAMSys Label Printer Antenna. This
antenna has an expected read range of 1-12 inches and only requires a power
output of approximately 17 dBm for optimal performance.
Figure 9–Low-Power UHF Antennas
As shown in Figure 10, mounting slots/cutouts are provided. Do not attempt to drill new
mounting holes in the antenna.
Figure 10–Label Programmer Antenna Dimensions
Caution
To prevent reader damage, the RF port must be properly terminated with a 50 Ohm load
or a functional UHF RFID antenna before power up. Never power up the reader unless the
loads or antennas are connected. Always power down the reader before removing an
antenna or load from an RF port.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
0.808
0.748
0.138
0
0.867
0
0.108 RAD. TYP.
4.488 4.646
0.187" THK. MAT'L
Summary of Contents for MP9311 Series
