MP9311 User’s Guide
18
Reading Tags
Tag Reading Overview
When the reader completes the initialization sequence, the reader activates the RF field
and, depending on the configuration, begins transmitting read detect (Rd) commands at
the specified frequency. When a tag is placed within range, the reader activates the tag and
reads the data. The following example shows a typical Rd return message with tag data
that was returned by the reader:
{Rd,d:E016000000000D53,t:IS186A;C4
Reading Tags Using RF Command Suite
RF Command Suite is automatically configured to display tag data as the data is
received from the reader. However, tool settings can be changed to match your
requirements. Refer to the following sections and the
RF Command Suite User’s
Guide
to configure the application.
To configure the RF Command Suite for your reader, perform the following:
1.
From the tool bar pull-down menu, select
File
D
Load Macro File
.
2. Navigate to
C:\Program Files\SAMSys\RFCS\Macros
and select the
MP9310_Default.txt
file and press
Open
. This will reconfigure the function keys and
other aspects of the RF Command Suite to match the MP9311.
3. In addition to the macro file, load the correct XML configuration file. Select the
Reader Config
Interface and verify the correct XML configuration file is shown in
the Path to XML Configuration Definition.
4. If the path does not show the
MP9310.xml
file, press the Browse
button and
choose
MP9310.xml
.
Summary of Contents for MP9311 Series
